Replacing the front bezel
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Procedure
1. Align the tabs on the front bezel with the slots on the chassis, and then rotate the front bezel towards the chassis until it snaps into
place.
NOTE:
Ensure that the front-bezel slot is aligned correctly with the optical drive.
2. Place the computer on its side.
Post-requisites
.
9
Replacing the front bezel
19
Summary of Contents for Inspiron 3671
