Table 8. Rear view of the system (continued)
Item
Ports, panels, or slots
Icon
Description
9
System identification
button
Press the system ID button:
●
To locate a particular system within a rack.
●
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
●
To reset iDRAC using system ID, ensure that the
system ID button is enabled in the iDRAC setup.
●
If the system stops responding during POST, press
and hold the system ID button (for more than 5
seconds) to enter the BIOS progress mode.
10
OCP NIC port (optional)
N/A
This port supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
11
NIC port (2)
The NIC ports are embedded on the LOM card that is
connected to the system board.
12
BOSS S2 card (optional)
N/A
This slot supports the BOSS S2 module
For more information about the ports, see the
Inside the system
Figure 10. Inside the system
1. Drive backplane
2. Rear mounting front PERC module
3. Dual fan module (4)
4. System board
5. Memory DIMM socket for processor 2 (B1)
6. Heat sink for processor 2
7. Riser 3
8. Intrusion switch
16
System overview
