3
Follow the procedure in
After working inside your system
Installing the heat sink
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
Before working inside your system
3
.
Steps
1
If you are using an existing heat sink, remove the thermal grease from the heat sink using a clean lint-free cloth.
2
Use the thermal grease syringe included with your processor kit to apply the grease in a thin spiral on the top of the processor.
CAUTION:
Applying too much thermal grease can result in excess grease coming in contact with and contaminating the
processor socket.
NOTE:
The thermal grease syringe is intended for one-time use only. Dispose the syringe after you use it.
Figure 54. Applying thermal grease on top of the processor
3
Align the screws on the heat sink with the standoff screws on the system board.
4
Using a Phillips #2 screwdriver, tighten the screws in the following order to secure the heat sink to the system board.
a Tighten the first screw three turns.
b Tighten the screw diagonally opposite to the screw you loosened.
5
Repeat the procedure for the remaining two screws.
6
Return to the first screw to tighten it.
80
Installing and removing system components
