Figure 72. Removing the power distribution board
Next step
1
Replace the power distribution board
Installing the power distribution board
Prerequisites
1
Follow the safety guidelines listed in the
.
2
Follow the procedure listed in
Before working inside your system
.
Steps
1
Align the slots on the power distribution board (PDB) with the standoffs on the chassis.
2
Using a Phillips #2 screwdriver, replace the screws that secure the PDB to the chassis.
3
Connect the cables to the system board and the drive backplane.
NOTE:
Route the cables properly when you replace the PDB to prevent the cable from being pinched or crimped.
Installing and removing system components
95
