Recommended tools
You need the following tools to perform the removal and installation procedures:
•
Key to the bezel lock
The key is required only if your system includes a bezel.
•
Phillips #1 screwdriver
•
Phillips #2 screwdriver
•
Torx #T15 screwdriver
•
Plastic scribe
•
1/4 inch flat blade screwdriver
•
Wrist grounding strap connected to the ground
•
ESD mat
Front bezel
Removing the optional front bezel
Prerequisite
1
Follow the safety guidelines listed in the
NOTE:
The bezel key is part of the bezel package.
Steps
1
Unlock the bezel.
2
Press the release button, and remove the left end of the bezel.
3
Slide the tabs on the right end of the bezel out of the slots on the chassis and remove the bezel.
Figure 13. Removing the optional front bezel
42
Installing and removing system components
