background image

Quick Installation Guide 

Introduction

 

deliberant

 

Page 5

 

 

CE Mark Warning 

This is a Class A product. In a domestic environment this product may cause radio interference in 
which case the user may be required to take adequate measures. 

R&TTE Compliance Statement 

This equipment complies with all the requirements of the Directive 1999/5/EC of the European 
Parliament and the Council of 9 March 1999 on Radio Equipment and Telecommunication Terminal 
Equipment and the Mutual Recognition of their Conformity (R&TTE). 

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal 
Equipment and Satellite Earth Station Equipment) As of April 8, 2000. 

Safety 

This equipment is designed with the utmost care for the safety of those who install and use it. 
However, special attention must be paid to the dangers of electric shock and static electricity when 
working with electrical equipment. All guidelines of this manual and of the computer manufacturer 
must therefore be allowed at all times to ensure the safe use of the equipment. 

EU Countries Intended for Use 

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, 
Finland, France (with Frequency channel restrictions), Germany, Greece, Ireland, Italy, Luxembourg, 
The Netherlands, Portugal, Spain, Sweden and United Kingdom. 

The ETSI version of this device is also authorized for use in EFTA member states Iceland, 
Liechtenstein, Norway and Switzerland. 

EU Countries Not Intended for Use 

None. 

 

Summary of Contents for APC 5M-18 V2













Reviews: