Delem
V0614, 2.21
Files with
Delem control settings
:
MAT_TAB.TXT
Location: \Hard Disk\Delem\Data\Tools
This file contains the material properties of the Delem control application.
Since this file is a plain text file, it is possible to program materials for the Delem application
by editing this file directly. Normally, materials are programmed in the menu ‘program
constants’.
ANGLECOR.CDB
Location: \Hard Disk\Delem\Data\Tools\ ppsupp
File with the angle correction database. See the operation manual of the control for more
information about the angle correction database.
This file contains angle corrections for bends and is maintained by the Delem application.
SPCORxx.TAB
Location: \Hard Disk\Delem\Data\Tools\mpsupp
These files contain spindle correction tables for correction of axes positions. See the Delem
machine parameter manual for more information about spindle corrections.
MAC_0001.DLC
Location: \Hard Disk\Delem\Data\Tools
This file contains all machine parameter settings of the control.
POC_0001.DLC
Location: \Hard Disk\Delem\Data\Tools
This file contains the settings of the programming constants, which are programmed in the
menu ‘program constants’.
NONVOLATILE.BIN
Location: \Hard Disk\Delem
Contains the momentary Delem application settings: manual mode parameters and active
program. In case a loaded program causes problems with operation, you could delete this
file. On the next restart, manual mode parameters will have been cleared and no bend
program will be active.
KO_TAB.BIN
Location: \Hard Disk\Delem\Bin
Contains the active KO-Table of the Delem application. See also section 3.2.
