Delem
V0614, 2.10
1.3. Option installation
1.3.1. Request option on the control
It is possible to install software options on the control. Options can be requested at Delem.
Options for a DA-52s control can be purchased at any moment. It is done by buying an
‘Option Voucher’ for a specific function (e.g. 2nd servo axis). A new option voucher is valid
for any DA-52s control. Hence, it is possible to buy one or more option vouchers and keep
them in stock until the option becomes necessary on a control.
An option voucher looks as follows:
Figure 1.h
At the top, an option identifier and a short description is placed. In the middle, a 16-digit
number is placed, divided by dashes. When requesting an option you must enter this number
exactly as it is shown, including the dashes.
When an option must be installed on a control, you can take a voucher for the specific
function and request the option on the control. Once an option is requested on a control, the
control will receive a certificate (license) for the requested option. From that moment on, the
voucher is linked to this control, it cannot be used anymore on any other control.
If necessary, the option can be requested many times. Should a certificate get lost somehow,
simply request the same option again for the same control.
The procedure to install an option runs as follows:
•
Go to the machine parameters menu.
•
Choose menu 7: 'Options'.
