DELAIR UX5 HP, User Manual

Page: 96 / 137

b. Disconnect the USB cable from the gBox and the tablet.
9. Tap .
10. Disconnect the battery. Tap
.
11. If you have selected PPK as the operating mode in the flight checklist, you are prompted to download
the base station file. Tap .
12. Remove the camera from the rover. Verify that the number of images taken during the flight is equal to
the number of trigger commands and feedback events recorded in the flight logs (do not take into
account the test images taken on the ground; Delair recommends deleting the test images from the SD
card). If these numbers do not correspond, the software can automatically correct for a mismatch. For
more information, see
Exporting flight data for processing, page 100 .
Note –
l
If there are more than three images missing or more than three additional images (excluding
test images or images from another flight), Delair recommends performing the flight again.
l
If the missing images are not due to obvious reasons such as a depleted camera battery during
flight, an SD card with incorrect specifications (see
Locating your equipment, page 67 ), or
incorrect camera settings, contact your Delair distributor.
13. Validate the block(s) that were successfully mapped during the flight.
14. Tap
to close the post-flight checklist and return to the Flights tab .
After completing the post-flight checklist, the status of the flight changes to Flown, log files downloaded
and settings frozen .
To redo this flight, make a copy of the flight. The settings of the new flight are editable.
In the Blocks tab , one of the following icons appears next to the block name in the block list:
l
Successfully mapped and settings frozen .
l
Not successfully mapped and settings frozen .
A frozen block can still be scheduled in other flights. It will be flown again with the same settings. To map
the block with different settings, make a copy of the block and change the settings as required.
96
Delair-Tech | 676, Rue Max Planck – 31670 Toulouse-Labège, France | Tel: +33 (0) 5 82 95 44 06 | www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech .