DELAIR UX5 HP, User Manual

Page: 56 / 137

7. Secure the gBox using the Velcro strap.
Checking the launcher
1. Make sure the launch slider is in good condition, and the launch dock moves freely along the slider. If
the slider is damaged, contact your Delair distributor.
2. Check the launcher cord is not worn, and make sure there is enough elastic in the cord when it is
stretched tight. If the cord must be replaced, click in the Home screen, select Launcher in the list to
the right and then select Replacing the launcher cord or refer to the UX5 HP Aerial Imaging Solution
Maintenance Guide .
3. Make sure the launch dock is in good condition. If it is damaged, contact your Delair distributor.
4. Make sure the launch dock wheels are in good condition and move freely. If they are worn and must
be replaced, click in the Home screen, select Launcher in the list to the right and then select
Replacing the wheels of the launcher dock or refer to the UX5 HP Aerial Imaging Solution
Maintenance Guide .
Checking the rover
Thoroughly check the rover before each flight to make sure that it is undamaged from any previous flight.
Refer to the following sections:
l
Check the rover body, page 57
l
Check the pitot tube, page 57
l
Check the winglets, page 58
l
Check the propellers, page 58
56
Delair-Tech | 676, Rue Max Planck – 31670 Toulouse-Labège, France | Tel: +33 (0) 5 82 95 44 06 | www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech .