DELAIR UX5 HP, User Manual

Page: 106 / 137

Camera errors
Issue Solution
The camera is taking a picture
every 20 to 25 seconds.
1. Cancel the checklist.
2. Disconnect the rover battery.
3. Restart the checklist.
Autopilot errors
The appropriate action to take depends on the stage of the flight that the error occurs. For more
information, see
Taking action when an Autopilot error occurs, page 109 .
Autopilot error message types
The table below explains the types of autopilot error that can occur.
Code Description
2 There is an airspeed sensor hardware problem.
3 There is an autopilot configuration problem.
4 There is an autopilot configuration problem.
9 There is a pitch gyro sensor hardware problem.
11 There is a roll gyro sensor hardware problem.
13 There is a yaw gyro sensor hardware problem.
16 There is an autopilot configuration problem.
17 There is an invalid command in the flight plan.
18 There is an autopilot configuration problem.
19 There is an autopilot configuration problem.
20 There is an autopilot configuration problem.
21 There is an autopilot configuration problem.
22 There is a gyro sensor hardware problem.
23 There is an accelerometer sensor hardware problem.
25 The aircraft has flown past the 300 km limit.
26 The flight plan contains a waypoint that is outside of the geofence; or the aircraft has flown
outside of the geofence.
35 There is an autopilot configuration problem.
36 There is a gyro sensor hardware problem.
37 There is an autopilot configuration problem.
38 There is an autopilot configuration problem.
106
Delair-Tech | 676, Rue Max Planck – 31670 Toulouse-Labège, France | Tel: +33 (0) 5 82 95 44 06 | www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech .