14
2.
T
O
BEGINNING WORK
a) Keep people, animals and things at least 15 meters from the machine. Start the engine and lower the
3 cutting components as follows:
b) Pull the cable to free the side safety hooks. Activate the hydraulic switch and wait until the 2 side
cutting components are touching the ground.
c) Pull the cord again to free the rear safety hook. Activate the hydraulic switch and wait until the rear
cutting component is touching the ground.
d) Insert the PTO gradually bring it to 540 r.p.m.
e) Begin
cutting.
3.
A
T THE END OF WORK
a) Stop the tractor.
b) Disconnect the PTO.
c) Disconnect the cardan joint.
d) Raise the 3 cutting components.
e) Make sure that the safety hooks are in the correct position.
f) Clean the under sides of the cutting components to remove deposits of grass and dirt. Use a wooden
spatula so as not damage the paint.
g) Proceed to a visual check of the blades to make sure if there are damages.
