11
s) accordance with the height of the tractor draw-hook and to permit to the machine to work the most
parallelly to the ground , insert the screws and lock the nuts.
2.
M
OUNTING RIGHT CUTTING COMPONENT "8"
a) Insert the
CROSS BAR WHEEL CASE "10"
in the seat found on the right of the
RIGHT CUTTING
COMPONENTS "8"
, insert the screws and lock them with the nuts.
b) Insert in the front and rear hub of the right wheel-support cross bar the
MOWER WHEEL GROUP "11"
,
insert the distance washers, the click pin and lock.
c) Repeat steps "
a
" and "
b
" on the left side of the cutting component.
d) Insert the
SIDE CONNECTION BRACKET "14"
in the seat predisposed in the front side of the cutting
component, insert the screws and lock them with the nuts.
e) Repeat step "
d
" in the rear side of the cutting component.
f) Mount
the
CASING "13"
in the gear box.
3.
M
OUNTING LEFT CUTTING COMPONENT "9"
a) Repeat the operations from "
a
" to "
f
" described in the phase "2".
4.
M
OUNTING REAR CUTTING CUTTING COMPONENT "7"
a) Repeat steps from "
a
" to "
c
" and step "
f
" described in the phase "2".
5.
M
OUNTING RIGHT CUTTING COMPONENT ON MAIN FRAME
a) Insert the
SIDE CONNECTION BEAM "15"
with the seat oriented to the low in the pin of the front
connecting bracket, insert the pin and lock with the safety clip.
b) Repeat step "
a
" on the rear bracket.
c) Insert the two connecting beams in their seats of the connecting frame fixed in the right side of the main
frame, adjust the inter-axle "
L
" following the indications on the table "B", insert the screws and lock them
with the nuts.
d) Insert
the
SIDE END STROKE ROD "21"
in the right guide of the side safety device. Insert the hitch on
the other end of the same rod into the fork found on the left side of the right cutting component. Insert the
pin and lock it with the safety clips.
6.
M
OUNTING LEFT CUTTING COMPONENT ON MAIN FRAME
a) Repeat steps "
a
" to "
d
" described in phase "5".
