Del Medical DynaRad Phantom-8000, Installation, Operation & Service Manual

Page: 72 / 151

Phantom Installation, Operation & Service Manual
4-6 Check tube head rotation (friction lock)
4.6 Check tube head rotation (friction lock)
Tools Required:
• 5/16” Allen Wrench
Warning
Ensure that the both wheels are securely locked before beginning
this inspection.
Check that the tube head rotation (friction lock) is properly adjusted,
proceed as follows:
1
Check to ensure that there is no gap (1 in Figure 4-1) between the tube
head arm (2) and the friction pad (3) and that the bolt is flush (4).
Figure 4-1. Gap and bolt oh.
2
If there is a gap (1 in Figure 4-2) or if the bolt is not flush (2), then
tighten the bolt so that there is no gap and the bolt is flush.
Figure 4-2. Gap and bolt not ok.
1
4
2
3
2
1