Del Medical DynaRad Phantom-8000, Installation, Operation & Service Manual

Page: 30 / 151

Phantom Installation, Operation & Service Manual
1-4 Specifications
1.4 Specifications
Table 1-1: Specifications
Specifications
Voltage 104-126VAC/208 - 253 VAC
Line Voltage Regulation 5% maximum at maximum output
Current 30 Amps Maximum Momentary @ 115VAC
Requires 30 amp or greater dedicated breaker or line fuse.
18 Amps Maximum Momentary @ 230VAC
Requires 18 amp or greater dedicated breaker or line fuse.
Frequency 50/60 Hz Single Phase
Generator Type High frequency inverter, 1.25 kilowatt output
kVp Range 50-100 kVp continuously adjustable, with 1 kVp resolution
mA Range Fixed, 12.5 mA, constant independent of kVp or time settings
Exposure Time 0.01 to 4.0 seconds in 96 increments
X-Ray Tube Stationary Anode 100 kVp
Filtration 3.6 mm Aluminum Equivalent or More @ 100kVp
Target Material Tungsten
Anode Capacity 25,000 Heat Units
Focal Spot 1.0 mm (NEMA)
Beam Angle 15
°
Collimator Certified Manual
Collimator Lamp Source 30 second timer
Duty 3.3%
Mode of Operation Momentary
Relative Humidity Limits
Transit/Storage
10% to 100%
Operating
10%-80% Non-Condensing
Atmospheric Limits 14.5 inHg to 30.74 inHg
500 hPa to 1060 hPA
Weight 95 lbs (42 Kg) Total/ X-Ray Generator 39lbs (17.7 kg)/Control
Console (7 lbs (3.2kg)
Certifications:
Classified To UL 187. Certified To
CAN/CSA C22.2 No.
114-M90
.
Equipment not suitable for use in the presence of flammable anesthetic mixtures with air, oxygen or nitrous
oxide.
No user serviceable parts