Del Medical DynaRad Phantom-8000, Installation, Operation & Service Manual

Page: 68 / 151

Phantom Installation, Operation & Service Manual
4-2 Cleaning External Surfaces
4.2 Cleaning External Surfaces
Tools Required:
• cleaning wipes
• non-abrasive, hospital-grade cleaner
Use cleaning wipes and non-abrasive, hospital-grade cleaner to clean
external surfaces of the Phantom.
Warning
This equipment is NOT classified as anaesthetic-proof and may
ignite flammable anesthetics. Flammable agents used for skin
cleaning or disinfecting may also produce an explosion hazard.
• Ensure the power has been disconnected before starting any cleaning
operation.
• Ensure no liquid gets into the unit.
• Do not immerse the equipment, including any components or
accessories, in liquid.
• Do not autoclave the equipment, including any component or
accessories.
• Do not use water. Water can short-circuit the electrical installation and
cause corrosion to mechanical parts.
• Do not use acid or abrasive products.
• Use only a dry cloth to clean chrome-plated parts.
• Only the surface areas of unit parts, including accessories and
connection cables, should be disinfected using a gaseous disinfectant.
For safety reasons, do not spray disinfectants.
• Clean painted parts with a cloth and products appropriate for
cleaning plastic materials; after cleaning wipe the surfaces with a
clean, dry cloth.
• Do not spray cleaning or disinfection solution directly on the
equipment. To disinfect, moisten a cloth with a 70% Isopropyl alcohol
solution or equivalent and wipe the surface of the equipment.
• When disinfecting the examination room, ensure the unit is covered
with plastic sheets.