proxSafe flexx
V08/09/09
ps_flexx_wi_en
11
5.
Disconnect the two connectors for DOOR
STRIKE and DOOR CONTACT from the
backplane PCB (as shown above).
Note:
Remember colour and position of cables
(see also picture 8. below)!
6.
Guide the whole door contact cable (grey)
from the inside back through the hole on
the right side of the housing.
7.
Loosen the two screws from the door lock of
the front door with a socket wrench (as shown
above) and take it off from the housing.
8.
Now guide the door contact cable through
the according whole on the left into the
inside of the housing.
Plug the two connectors again into the
backplane PCB:
brown/white: right into DOOR STRIKE
yellow/green: left into DOOR CONTACT
(see also 3.13 “Connect Door Contact”)
