10
©
2001 Directed Electronics, Inc.
Your system can be armed while driving the vehicle! Simply press
and hold
on your transmitter for 1.5 seconds while the
vehicle is running or the ignition is on. The system will chirp once
and then once more to indicate that the ignition is on. The system
will not respond to any input except the door triggers and the
starter kill relay (if installed) will not be activated. The system will
disarm automatically when the ignition is turned off. The siren will
chirp twice and the LED will stop flashing.
Multi-Level Security Arming allows you to select which of the
system's inputs or sensors you want to be active and which you
want to be bypassed. (Refer to the Table of Zones section in this
manual.) Pressing
(only on an expanded configuration trans-
mitter) again within five seconds of arming the system will activate
Multi-Level Security. Each time
is pressed, a different security
level is selected.
Multi-Level Security provides the following levels of security:
■
Pressing
once: The siren chirps once. The system is armed.
■
Press
a second time within five seconds: The siren chirps
twice followed by a long chirp. Zones Two and Five are now
bypassed.
■
Press
a third time within five seconds: The siren chirps
three times followed by a long chirp. Zones Four and Six are
now bypassed.
Multi-Level Security Arming
Arming While Driving
