background image

1

O W N E R S   M A N U A L

Standard Features

The following features are standard with your
RAS 200 Remote Start:
Two button remote control(s)*
Status Indicator (LED)
Valet/Service mode switch
Remote Start capabilities
Remote Heater/AC capabilities
Parking Light Verification
Safety Inputs (Brake & Hood)
Remote Shutdown Operation
Extended Range Receiver
Stop & Go
Auto Cold Start (Protected)
*

S models provided with single transmitter.

Optional Features 

that you may

add to your RAS 200 (Consult with your
technician)
Remote Keyless Entry (Door
Lock/Unlock)
Trunk/Hatch Release
Window Roll-up

Note: Some features and options may
require additional parts and labor or may not
be appropriate for certain vehicles.
Automatic Transmission and Electronic Fuel
Injection is required on vehicles for Remote
Start products.

System Operation

Important:

Do not operate this remote

auto start in an enclosed garage or area
without proper ventilation. Be sure to famil-
iarize yourself with the features of the
Remote Auto Start Product prior to using the
product.

PROGRAM SWITCH:

The RAS is equipped with a program
switch.This program switch is usually
mounted in a convenient location under
or around the lower dash. If you can not
locate it, ask your installing dealer to
show you it’s location. If you desire to put
your Remote Auto Start in Service Mode;
this will allow you to use the optional
keyless entry features only, the vehicle
will not start with the remote control.

To enter the service mode:
1.Turn
ignition
to the
ON posi-

R A S   2 0 0

Button 1

LED

Button 2

• •

• •

Button 2

LED

Button 3

Button 1

2- Button

Transmitter

3- Button

Transmitter

+

ON

Press

+

Hold

Summary of Contents for RAS 200

Page 1: ...ion and Electronic Fuel Injection is required on vehicles for Remote Start products System Operation Important Do not operate this remote auto start in an enclosed garage or area without proper ventilation Be sure to famil iarize yourself with the features of the Remote Auto Start Product prior to using the product PROGRAM SWITCH The RAS is equipped with a program switch This program switch is usu...

Page 2: ... optional feature Driving the vehicle after remote started Unlock the door by press ing button 2 on remote transmitter optional Enter vehicle turn ignition key to the on position Note Do not turn the key all the way to the start position as you may damage the starter Once the ignition key is turned to the on position press the brake pedal and shift the car into the proper gear and you may now driv...

Page 3: ... While pressing the brake pedal press button 1 on the transmitter 3 The LED will flash rapidly and the parking lights will blink 4 times then turn on solid 4 Release the brake pedal and turn the ignition key to off position and remove You now may exit the vehicle and lock the doors with the keyless entry feature optional When re entering the vehicle simply turn the ignition key to the on position ...

Page 4: ...vy Company Inc Rev 2 October 1999 Cerritos Ca 90703 PARKING LIGHT FLASHING FUNCTIONS Flashes Function 1 DOORS LOCKED optional 2 DOORS UNLOCKED optional 4 RAS UNABLETO STARTVEHICLE 5 AUTOMATIC COLD START ACTIVATION ENGAGED 10 AUTOMATIC COLD START ACTIVATION DISENGAGED LED STATUS INDICATOR FUNCTIONS Flashes Function SLOW DOORS LOCKED optional RAPID VEHICLE IS BEING REMOTE STARTED RUNNING SOLID REMOT...

Reviews: