29
©
2001 Directed Electronics, Inc.
LED:
Red light mounted somewhere in the vehicle. It is used to
indicate the status of your system. It is also used to report
triggers and faults in the system or sensors.
Shock Sensor:
This system is packaged with a DoubleGuard
®
Shock Sensor. This sensor is mounted in the vehicle and designed
to pick up impacts to the vehicle or glass.
Siren:
Noise generating device usually installed in the engine
compartment of the vehicle. It is responsible for generating the
“chirps” you hear, as well as the six tones you hear while the alarm
is triggered.
Transmitter:
Hand-held, remote control that operates the various
system functions.
Trigger or Triggered Sequence:
What happens when the alarm
“goes off” or “trips.” The triggered response of your system consists
of 30 seconds of siren sounding and parking light flashing.
Valet
®
Switch:
A small push button switch mounted somewhere
inside the vehicle. It is used to override the alarm when the remote
transmitter is lost or damaged, or to put the system in Valet
®
mode.
Warn Away
®
Response:
Lighter impacts to the vehicle will
generate the Warn Away response. It consists of several seconds of
siren chirps and parking light flashes.
Zone:
A zone is a separate input that the security alarm can recognize
as unique. Each input to the security system is connected to a
particular zone. Often two or more inputs may share the same zone.
