8
©
2001 Directed Electronics, Inc.
Using Your System
The remote button numbers in this manual correspond to the
standard configuration unless otherwise specified. Remember, this
is not the only way your transmitters can be programmed. Your
transmitters may also be programmed for expanded configuration
or custom configured by a dealer to meet your needs.
You can activate, or arm, the system by pressing
for one
second. When the system arms, you will hear a short siren sound,
or chirp, and the parking lights will flash once. If the vehicle’s
power door locks have been connected to the system, the doors
will also lock.
While the system is armed, the status LED will flash approximately
twice per second, indicating that the system is actively protecting
your vehicle. If you hear a second chirp after arming and see the
status LED flashing in groups, refer to the Diagnostics section of
this guide. This extra chirp is called Bypass Notification.
The system can also be programmed to arm itself automatically
(called passive arming). If the system is programmed for passive
arming, it will automatically arm 30 seconds after the ignition is
turned off and the system detects you leaving the vehicle by
opening and closing a door. Whenever the system is in its 30-
second passive-arming countdown, the status LED will flash twice
Arming
