12
©
2001 Directed Electronics, Inc.
state. The system will not disarm, but rather reset. This prevents
you from having to disable the system should you wish to stop
the triggered sequence without visually checking the vehicle.
Pressing the disarm button again, after resetting the system,
will disarm the system. Pressing the disarm button on the trans-
mitter during the first six seconds of the triggered sequence
will disarm the system immediately. The six second timer is
provided for your convenience, in case you inadvertently trigger
the system.
This feature allows you to disarm the system without the remote
transmitter should it be lost, damaged or disabled. In order to
disarm without a transmitter, you must have the vehicle’s ignition
key and know where the Valet switch is. Be sure to check with the
installer for the location of the Valet switch.
To disarm the security system,
turn ignition to "on" position.
Press and release the Valet
switch within 15 seconds. The
system should now disarm. If it does not, you may have waited too
long. Turn the ignition off and on and try again.
LOCATION OF VALET SWITCH
______________________________
It is also possible to disarm the system using the Ghost Switch.
Please see the following Ghost Switch
™
section of this guide.
DRW-35
Disarming Without a Transmitter
