background image

 

 

31

30

© 2022 Dehaco B.V. • Operation and maintenance manual DSG Demolition and Sorting grabs • No. DSG.2165.0001 • 31-01-2022

Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • 

 +31 (0)252 - 41 79 50 • 

 [email protected] • www.dehaco.nl

9. Storage

8. Repair

8. REPAIR

 WARNING!

- RISK OF PERSONAL INJURY

Improper repair of the demolition and sorting grab can cause 
serious injury and damage.

 

Ø

Repairs may only be carried out by Dehaco B.V. or an 
authorised Dehaco dealer.

◊ 

For technical support, please contact Dehaco B.V. or a 
Dehaco dealer in your area.

8.1 Repair service for the 

demolition and sorting grab

ATTENTION
- MIXED HYDRAULIC OIL

Never mix mineral oil with non-mineral oil. Even small traces of 
mineral oil mixed with non-mineral oil may result in damage to 
both the demolition and sorting grab as well as the excavator. 
Non-mineral oil loses its biodegradability.

 

Ø

Use only one type of hydraulic oil.

◊ 

Always indicate which hydraulic oil is used when sending the 
demolition and sorting grab for repair.

9. STORAGE

9.1 Demolition and sorting grab

 WARNING!

- RISK OF TIPPING

If the demolition and sorting grab tips over while stored,
this can lead to serious injury and property damage.

 

Ø

Preferably, position the demolition and sorting grab on 
square wooden beams or a pallet. Ensure the horizontal 
surface is level.

9.1.1 Procedure for storage

1)  Open the shells of the demolition and sorting grab. The 

demolition and sorting grab is more stable when it is stored 
with the shells open. There is also less oil in the demolition 
and sorting grab when the shells are open. As a result, less 
oil loss and less oil in the environment will occur should an 
unexpected leak be detected. 

2)  Remove the demolition and sorting grab from the excavator.
3)  Store the demolition and sorting grab in a dry, well ventilated 

area.

4)  If the only possibility for storage is in the open, the 

demolition and sorting grab must be protected from the 
weather. For example, by using plastic foil or protective 
covers.

9.2 Grease cartridges

 WARNING!

- FIRE AND HARMFUL GASES

Burning grease releases harmful gases.

 

Ø

Never store grease cartridges near flammable or self-
igniting substances.

 

Ø

Do not expose grease cartridges to direct sunlight.

◊ 

Store grease cartridges in a cool, well-ventilated area.

Summary of Contents for DSG




















Reviews: