background image

 

 

23

22

© 2022 Dehaco B.V. • Operation and maintenance manual DSG Demolition and Sorting grabs • No. DSG.2165.0001 • 31-01-2022

Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • 

 +31 (0)252 - 41 79 50 • 

 [email protected] • www.dehaco.nl

5. Operation

5.5.5 Using the chain

 WARNING!

- RISK OF TIPPING

The excavator can tip over and cause injury and damage.

 

Ø

Only operate the demolition and sorting grab when the 
excavator is on a safe, stable surface.

5.5.6 Moving the excavator

Never move the excavator sideways by placing the demolition and 
sorting grab on the ground to lift the excavator. This can cause 
severe damage to the demolition and sorting grab.

5.5.7 Moving the arm

Never move the excavator or arm while working with the 
demolition and sortin grab.

5. Operation

5.5.8 Rotating the demolition and sortin grab

Never rotate the demolition and sorting grab while operating the 
grab. This can cause severe damage to the demolition and sorting 
grab. 

5.5.9 Extending the bucket cylinder

Never extend the cylinder while operating the grab. This action 
will make the demolition and sorting grab unusable.

5.5.10 Pulling

Never use the demolition and sorting grab to pull on support 
beams, supports or walls. This could result in severe damage. 
Moreover, the excavator could lose stability and tip over.

5.5.11 Lifting/transporting

Never use the demolition and sorting grab to lift or transport 
material. The tool is not designed for this and such use may result 
in severe damage.

5.5.12 Hammering

Never use the demolition and sorting grab to hammer on or 
against the structure to be demolished. This can cause severe 
damage to the demolition and sorting grab.

5.5.13 Pushing debris

Never use the demolition and sorting grab to push debris.

5.5.14 Abrupt movements

Never make sudden movements with the demolition and sorting 
grab in an attempt to release when stuck in a construction.

Summary of Contents for DSG




















Reviews: