DEHACO DSG, Operation And Maintenance Manual

Page: 7 / 19

13 12 © 2022 Dehaco B.V. • Operation and maintenance manual DSG Demolition and Sorting grabs • No. DSG.2165.0001 • 31-01-2022 Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)252 - 41 79 50 •

info@dehaco.nl • www.dehaco.nl
3. Transport 2. Overview
2.4 Applications
General: sorting and loading work.
Demolition: masonry and timber structures.
2.5 Warranty
The following shall render the warranty void:
◊
Any use not in accordance with this manual.
◊ Maintenance which is not performed or is performed
incorrectly.
◊ Use of incorrect materials.
◊ Use of unapproved components.
◊ Damage caused by wear.
◊ Damage caused by improper storage.
◊ Changes implemented without consulting the manufacturer.
2.6 Removing the packaging
1) Remove all packaging material.
2) Dispose of the packaging material in accordance with
applicable regulations.
3) Check that the delivery is complete.
4) Inspect the delivery for any visible damage.
5) Contact Dehaco B.V. or your dealer if any defects are
identified.
2.7 Scope and content of the delivery
The demolition and sorting grab is delivered with the following:
◊
Demolition and sorting grab.
◊ Operation and maintenance manual.
◊ Parts list.
◊ EC declaration of conformity.
◊ Any ordered accessories such as hoses and couplings.
3. TRANSPORT
WARNING!
- TIPPING FORK-LIFT TRUCK AND/OR FALLING DEMOLITION AND
SORTING GRAB
A falling demolition and sorting grab and/or tipping forklift
truck can cause serious injury and property damage
Ø
Only use machines with suitable capacity to transport the
demolition and sorting grab.
Ø
Ensure no persons are in the vicinity of the demolition and
sorting grab.
Transport the demolition and sorting grab with the shells open.
The demolition and sorting grab is more stable when being
transported with the shells open. There is also less oil in the
demolition and sorting grab when the shells are open. As a result,
less oil loss and less oil in the environment will occur should an
unexpected leak be detected.
◊ Open the shells of the demolition and sorting grab for
transport. Proceed as follows to ensure the shells remain
open:
- Seal all hose ports and connections with the supplied
plugs and cap nuts when the hydraulic hoses are
removed.
- If the hoses remain attached to the demolition and
sorting grab for transport, ensure the hoses are inserted
in the demolition and sorting grab.
3.2 Transport with a fork-lift truck
Ø
Place the fork-lift truck under the housing to prevent the
demolition and sorting grab from tipping or falling.
Ø
Lift the demolition and sorting grab slowly.
Ø
Transport the demolition and sorting grab to its intended
location.
3.3 Transport by lorry
WARNING!
- DEMOLITION AND SORTING GRAB CAN SLIP OR TRIP
If the demolition and sorting grab slips or tips over and falls from
the lorry, it can cause serious injury and property damage.
Ø
Place the demolition and sorting grab on an anti-slip mat.
Ø
Secure the demolition and sorting grab with straps or
chains.
◊ Secure the demolition and sorting grab on the loading
surface as shown in figure below.
◊ Observe all national/regional regulations regarding the
securing of loads.