background image

 

3

© 2022 Dehaco B.V. • Operation and maintenance manual DSG Demolition and Sorting grabs • No. DSG.2165.0001 • 31-01-2022

Preface

© Copyright 2022, Dehaco B.V. 

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording 

or otherwise, without express written permission from Dehaco B.V. This also applies to any accompanying drawings and diagrams. Dehaco B.V. reserves the right to revise sections of 

this document at any time and without prior or direct notice to the customer. The contents of this manual can also be changed without prior notice. For information regarding setting, 

maintenance or repairs not included in this user manual, please contact your supplier’s technical department. This user manual has been prepared with the utmost care, however Dehaco B.V. 

can not accept responsibility for any errors in this user manual or the consequences thereof.

PREFACE

Thank you for choosing for a demolition and sorting grab from Dehaco!

Dehaco was established in 1985 and has since gained a leading position in the European demolition industry. With our complete product 
range, we are the ideal complete supplier for the demolition, recycling and asbestos remediation industry in the Benelux.

We are not only leading in the field of selling all imaginable requirements for these markets, our large rental fleet and modern test centre 
for equipment items and asbestos tools also contribute to Dehaco’s unique market position. Dehaco is a market leader in the Benelux in 
the field of asbestos remediation products, dust control products and hydraulic equipment units for the demolition sector.

Dealers
Dehaco works with a network of global dealers for the sale of demolition equipment, asbestos removal and dust control products. These 
dealers are also qualified to service and maintain your equipment.

Demolition and sorting grabs
Dehaco demolition and sorting grabs include a CE mark and comply with all relevant European safety regulations. Safety instructions 
provided in the maintenance and user manual must be followed. The safety and operating instructions for the excavator as well as 
regulations in the vicinity of where the demolition and sorting grab is used, maintained or repaired must also be observed.

Modifications to the demolition and sorting grab may only be performed with written permission of the manufacturer! Only then shall the 
warranty conditions and CE liability apply.

Operation and maintenance manual
The purpose of this operation and maintenance manual is to familiarise you with the safe and effective operation of the demolition and 
sorting grab. Maintenance instructions are also included in this document.

Read these instructions carefully before attaching and using the demolition and sorting grab.

Any comments, requests or omissions may be directed to Dehaco B.V. Contributions to improve this manual are always welcome. We hope 
you enjoy your purchase.

Dehaco B.V.

Kruisbaak 25

2165 AJ Lisserbroek (NL)

T +31 (0) 252 41 79 50

F +31 (0) 252 41 85 31

E [email protected]

I www.dehaco.nl

 

Dealer

Summary of Contents for DSG




















Reviews: