Degometal GO 3312, Safety Instructions And Directions For Use

Page: 34 / 40

34
www.degometal.com
6.3 Charge

Charge the battery of Degometal brand only when the temperature is between -5°C and +55°C!

Please take the charger out of the package, plug in the power supply, insert the Degometal
battery into the charger correctly, please mind the direction of electrodes.
Push a little bit hard when inserting the battery, it will be charged automatically.
Function indicator :
Signal
Meaning Measures
Green light stays on Battery full/ trickle charging Normal
Green light blinks Charging Normal
Red light stays on Abnormal charging temperature (the battery is
too hot or too cold) Charging must be ended if it’s
outside
normal temperature
range (O°C-45°C)
Red light blinks Poor contact in the charger plug, battery
damage or battery error (outsourced product) Check in the plug contact is poor.
If yes, please replace the charger
with good contact.
Otherwise,
the battery is
damaged, it can no longer be
used, and the charging must be
terminated.
6.4 Battery

Insert the battery, red led failure indicator cover 9 (GO3312 fig.A) blinks and then goes out,
indicating the power is on, and the tool is on normally. Check battery level;

Pull the trigger and then release (fig1), blue led digit indicator on function display (fig2) stays on
for 3 seconds and then off. Check the function display;

4 LED indicators are on, the power is 95% ±5%;

3 LED indicators are on, the power is 75% ±5%;

2 LED indicators are on, the power is 50% ±5%;

1 LED indicators are on, the power is 25% ±5%, charging is recommended;

With an over-discharged protection (ECP), the Degometal battery can be charged repeatedly for
about 1000 times

Check battery level during using as shown in figures above (fig1, fig2)

The battery can be inserted after cooling down properly.

Do not charge the battery after using the tool each time.

If the battery is working for significantly shorter periods of time after a recharge, it needs to be
replaced.

Do not allow the battery to be frozen. Store it in a dry place. The ideal operating temperature is
10°C to 50°C.
Fig 1 Fig2