Degometal GO 3312, Safety Instructions And Directions For Use

Page: 24 / 40

24
www.degometal.com
2.
2.1 Specified use
As specified in this manual, the rivet nut tool can only be used to install rivet nuts and rivet bolts.
The tool can only be operated in an indoor environment where the air temperature is between 0-55 °
C and the relevant air humidity is between 20-100/100%.
Please note that work area should be well lit.
ALL SAFETY RULES MUST BE FOLLOWED
！
2.2 Safety rules
Safety rules below must be followed to avoid electric shock, injury and/or fire.
·
Do not overload the rivet tool. Please use it within the specified power range.
· Do not use the rivet tool in a humid environment or near flammable liquids or gases. Explosion
hazard.
· Please note that battery near the handle must be fixed.
· When the rivet tool is not in use or when it is serviced, pleased remove the battery from the tool.
· Do not use the rivet tool as a striking tool.
· Store the rivet tool in a dry and enclosed place and out of the reach of children.
· Always wear goggles when operating the rivet tool. Personal protective equipment such as chemical
protective clothing, gloves, hard hats, non-slip shoes, earplugs and fall arresters are
recommended.
Never block the vents of the motor, never insert anything into the vents.
· Prevent the rivet tool from failing when placing it.
· Only use original parts for maintenance and repair.
· Have the rivet tool serviced only by a qualified professional. If in doubt, please mail the rivet gun to
the manufacturer.
Do not rivet without a plate! The rivet nut may come out of the rivet nut tool!
Never point the rivet tool at yourself or others!
2.3 Working scope
M3 to M10 rivet nuts of all materials, up to M12 in Alu
2.4 Specifications
Traction Power
：
24,000N
Weight
：
1.72kg (Battery excluded)
Stroke
：
0-8mm adjustable
Drive
：
14.4VDC motor
Noise
：＜
80dB
Dimensions
：
see picture ->