Degometal GO 3312, Safety Instructions And Directions For Use

Page: 33 / 40

33
www.degometal.com
6.2 Safety information
6.2.1 Quick charger
Note :

Please observe the following safety precautions to avoid electric shock, injury and/or fire;

The tool must be charged using the original Degometal battery and charger produced by the
manufacturer;

Check the plug, power cord and charger regularly. If there are any problems, please have it
repaired by maintenance technicians or qualified professionals.

Do not use the charger in a humid environment or near flammable liquids or gases. Explosion
hazard!

Never change non-chargeable battery nor damaged battery.

Store the charger a dry and enclosed place and out of the reach of children.

Never place a metal object in charging area to avoid circuit.

If the charger is installed on the wall, please ensure the battery will not fall of the charger due to
external influences (such as vibration).

This charger should not be used persons with physical or intellectual disabilities, or those who are
not trained nor have relevant knowledge, unless there is a safety monitor as the site to monitor
the entire process, safety monitor instructing them how to use the charger.
6.2.2. Quick chargeable battery
Note :
Please observe the following safety precautions to avoid electric shock, injury and/or fire;

Do not insert contaminated or wet battery into the charge.

Never discard the battery in a trash can, do not throw it into fire or water!
FRAN
CA
IS
EN
GLISH