![background image](http://html1.mh-extra.com/html/u-line/bostitch-h-3532/bostitch-h-3532_manual_3154993001.webp)
PAGE 1 OF 19
0923 IH-3532
H-3532, H-3534
BOSTITCH
®
PNEUMATIC STAPLER
1-800-295-5510
uline.com
BOSTIT
CH
Para Español, vea páginas 7-13.
Pour le français, consulter les pages 14-19.
SAFETY
Employer and/or user must ensure that
proper eye protection is worn. Eye protection
equipment must conform to requirements
of the American National Standards Institute
ANSI Z87.1 and provide both frontal and side
protection.
Eye protection which conforms to ANSI
specifications and provides protection against
flying particles from both the FRONT and the
SIDES should always be worn by the operator
and others in the work area when connecting
to air supply, loading, operating or servicing
this stapler. Eye protection is required to guard
against flying fasteners debris which could
cause severe eye injury.
WARNING! Non-side shielded spectacles
and face shields do not provide adequate
protection.
• Use the Bostitch
®
pneumatic stapler only for the
purpose for which it was designed.
• Never use this stapler in a manner that could cause
a fastener to be directed toward the user or others
in the work area.
• Do not use the stapler as a hammer.
• Always carry the stapler by the handle. Never carry
the stapler by the air hose.
• Do not alter or modify this stapler from the original
design or function without approval from Bostitch
Inc.
• Always be aware that misuse and improper
handling of this stapler can cause injury to yourself
and others.
• Never leave unattended with the air hose attached.
• Do not operate this stapler if it does not have a
legible WARNING LABEL.
• Do not continue to use a stapler that leaks air
or does not function properly. Notify Uline if
your stapler continues to experience functional
problems.
• Always handle the stapler with care
• Never engage in horseplay.
• Never pull the trigger unless nose is directed
toward the work.
• Keep others at a safe distance from the stapler
while in operation as accidental actuation may
occur, possibly causing injury.
• Keep hands and body away from the discharge
area of the stapler.
• Do not drive fasteners on top of other fasteners or
with the stapler at an overly steep angle as this
may cause deflection of fasteners which could
cause injury.
• This stapler produces SPARKS during operation.
NEVER use the stapler near flammable substances,
gases or vapors including lacquer, paint, benzene,
thinner, gasoline, adhesives, mastics, glues or
any other material that is – or vapors which are –
flammable, combustible or explosive. Using the
stapler in any such environment could cause an
EXPLOSION resulting in personal injury or death to
user and bystanders.
• Remove all fasteners from the stapler before
performing stapler operation check.
• Do not use oxygen, combustible gases or bottled
gases as a power source for this stapler, as the
stapler may explode, possibly causing injury.
• Do not use supply sources which can potentially
exceed 200 psig as stapler may burst, possibly
causing injury.