7
Picture 2. Design of OMNIPELL dry stove .
1 – pellet container cover, 2 – control panel with display, 3 – supply switch, 4 –
230 V supply socket, 5 – glass sheet, 6 – handle, 7 – ash-pan cover, 8 – air
intake socket, 9 - flue gas exhaust socket, 10 – deflectors made of vermiculite,
11 – claddings made of vermiculite, 12 – pellet chute pipe, 13 – burner, 14 –
ash-pan, 15 – body, 16 – pellet container, 17 – pellet feeder, 18 – igniter,
19 – pipe supplying air for combustion, 20 – flue gas exhaust fan, 21 – smoke
pipes, 22 – openings discharging heated air, 23 – temperature sensor socket.
4.2.
TECHNICAL DATA
Detailed description of construction, operation and
work of the electronic controller and fan is included in
the operating manuals enclosed to this documentation.
Recommendations of operating manual of controller
and fan should be unconditionally observed.
Table 1. Technical data of OMNIPELL stove .
Parameter
Unit
value
Nominal power
kW
8
Heating power range
kW 3.5-8
Nominal
efficiency
%
88.7 (92.5)
2
Seasonal energy efficiency
%
85
CO emission for 13% O
2
%
0.016(0.02)
2
Flue gas temperature
°C
195 (102)
2
Weight
1
kg
150
Flue gas stream for nominal power g/s
5.14
(2.92)
2
Recommended chimney draught
Pa
10-14
Flue size
mm
80
Supply voltage
V
230
Maximum power consumption
W
400
Power consumption for nominal power
kWh
0.120 (0.100)
Fuel consumption
kg/h
1.9 (0.8)
2
Fuel tank capacity
kg
26
Type of heater
of periodic combustion
Fuel
3
pellet with a diameter
of 6 mm
1)
Device weight depends on selected design version and its equipment.
2)
Data for nominal power 3.5 kW.
3)
The stove is factory adapted for combustion of pellet with a diameter of 6
mm, pellet with a diameter of 8 mm may be used after changes of settings in
the controller performed by the authorized service
.
Picture 3.
3
Dimensions of OMNIPELL dry stove.
4.3.
EQUIPMENT
Dry stove is delivered on a pallet, foil-wrapped and is fully assem-
bled. Scope of delivery can include additional components and subas-
semblies, according to the order of the user. Components which are
standard equipment are specified in table 2.
Table 2. Equipment of OMNIPELL stove.
Standard equipment of dry stove
Unit Qua
ntity
Stove operating manual
pcs.
1
Operating manual and warranty card for electronic controller
pcs.
1
Electronic controller
pcs.
1
Claddings of furnace chamber
set
1
4.4.
FUEL PARAMETERS
Sawdust granulate, called pellet, is a primary fuel for the OM-
NIPELL dry stove It is recommended to use A1 class pellet in accord-
ance with PN-EN ISO 17225-2:2014-07, with the following parameters:
granulated product: Ø 6-8 mm
length of granulated product: from 3.15 mm to 40.00
mm,
calorific value:
>16.5 MJ/kg
sulphur content:
max. 0.03 %
moisture:
≤
10 %
ash content:
≤
0,7 %
19
15
22
20
21
8
9
23
3
4
30
126
70
22
9
54
0
100
0
107
230
340
52
7
10
23
23
1
248
565
42
0
51
580
11
0
209
Φ
80
126
28
4
38
1
196
Φ
54
