background image

5

 

 

1.

 

INFORMATION 

Operating manual is an integral and essential part of the product 

and must be forwarded to the user also in case when the property is 

transmitted. User should carefully read the manual and save it for the 

future because all remarks included there are important guidelines con-

cerning safety during installation, usage and maintenance.  

Installation of dry stove must be carried out in accordance with the 

mandatory standards in country of destination, according to guidelines 

of the manufacturer and by qualified personnel. Improper installation of 

the device can be a reason for personal injuries and damage to prop-

erty for which the manufacturer is not liable.  

Dry stove can be used only for the purpose it was explicitly in-

tended. Any other use should be treated as inappropriate and in con-

sequence as dangerous. 

In case of error during installation, usage or maintenance works 

caused by non-observance of the legislation, regulations in force or in-

structions contained in this manual (or others, delivered by the manu-

facturer) the manufacturer rejects any contractual or non-contractual 

liability for resulting damages and the warranty for the device becomes 

void. 

Versions of the publication 

Due to continuous improvement of the product DEFRO reserves 

the right to update this publication without prior notice. 

Content of this Operating Manual is a property of DEFRO. Any 

copying, duplicating, publishing of content of this User’s Manual without 

prior written consent of DEFRO is forbidden. 

Manual storage and browsing its contents

 

We recommend to take care of this manual and store it in easily 

and quickly available location. If this manual has been lost, damaged 

or destroyed you should request a copy in the sales outlet or directly 

from the Manufacturer providing identification data of the product. All 

the most important information included in the operating manual are 

marked with “bold” and have symbols pointing out user’s attention to 

hazards which can be present during operation of the dry stove. Sym-

bols used in the text are explained below:  

Danger! 

Direct threat to life and health! Non-compliance with the 

recommendations marked in this way and misuse may 

result in death or major injuries. 

Danger! 

Danger from electrical voltage! Incorrect installation and 

incorrect electrical connections may cause danger to life 

by electric shock. 

Note! 

Warning symbol indicating that you should read carefully 

and understand the given information, to which it relates. 

Non-compliance with these recommendations may re-

sult in major damage to the equipment and create a haz-

ard for the user or the environment. 

Danger! 

Direct threat to health! Non-compliance with the recom-

mendations distinguished in this way may cause a fire or 

burns. 

Hint! 

Informative symbol. Useful information and hints are 

marked in this way. 

2.

 

BASIC SAFETY RULES 

2.1.

 

SAFETY WARNINGS 

 

 

The national and local provisions should be met. 

 

Equipment should be installed in compliance with the 
legal standards applicable in the given location, region 

or country.  

 

The equipment should be used by persons (including 
children) of impaired physical, sensory, mental capa-

bilities  and by persons without experience and re-

quired knowledge provided that such operation is not 

carried out under their supervision or after proper in-

struction by a person responsible for their safety. 

 

You should always observe the guidelines given in the 

operating manual to ensure correct use of the equip-

ment and to prevent accidents. 

 

Operation and adjustment should be carried out by 
adults. Errors and incorrect setting can cause hazard-

ous situations and/or incorrect operation. 

 

Prior to any operations the user (or any person oper-
ating the equipment) should read and understand 

whole contents of this manual.  

 

Equipment should be used only as intended. Each 

other use is considered as misuse and hazardous as 

a consequence. 

 

The equipment should not be used as a ladder or ob-
ject to lean against. 

 

Prior to installation you should make sure that the sub-
strate will resist force of the equipment considering its 

weight. 

 

In case of disturbances in operation the equipment can 

be restarted only when the occurred problem has been 

removed and the equipment is brought back to original 

condition. 

 

The user is fully responsible for misuse of the product 
and relieves DEFRO from any civil and criminal liabil-

ity. 

 

All types of modifications or replacement of equipment 
parts with non-original components or without authori-

zation may present a risk for operator and relieve DE-

FRO from any civil and criminal liability. 

 

Incorrect installation or maintenance (incompatible 

with contents of this manual), can cause injuries of 

people, animals or property damage. Then DEFRO 

shall be relieved of any civil or criminal liability. 

 

 

 

Part of equipment surface is very hot (doors, handle, 
window panel, flue gas discharge pipe, etc.). You 

should avoid direct contact with such components 

without suitable protective clothing or protective equip-

ment such as e.g. heat resistant gloves. 

 

Do not touch the window panel after heating up of the 
equipment. 

 

Keep children away from the equipment when it is op-

erating because each hot surface can cause burns. 

 

It is forbidden to start-up the equipment when the 
doors are opened or the window panel is cracked. 

 

Do not place and dry the underwear on the equipment. 
Possible dryers for hanging underwear or similar 

should be located at an adequate distance from the 

equipment - fire hazard. 

 

It is absolutely forbidden to open the doors if the flue 

is on fire. Then call the appropriate services. 

 

It is recommended to keep a distance min. 400 mm 
between hot parts of the equipment and medium in-

flammable materials; otherwise use commercially 

available insulation materials. Apply this hint also for 

furniture, curtains etc. Minimum distances are given in 

point 5.2 of the operating manual. 

Summary of Contents for OMNIPELL

































Reviews: