CAUTION!!!
EVERY TIME YOU ENTER IN THIS MENU, THE SPECIAL FUNCTIONS ARE RESTORED TO THE FACTORY VALUES
, so if
for example we have used 2 special functions and we have changed our mind on one of these, entering in the menu
again we will only need to reactivate the function that we intend keep (the other one will be deactivated
automatically).
SPECIAL FUNCTIONS - MENU 2
To access this menu for activation of special functions, you must:
1. Disconnect ARM and FOG
2. Note down the DIP-SWITCH configuration
3. Turn all DIP-SWITCH OFF
4. Remove the Jumper from BUZZ (J3)
5. Place the Jumper on J2
6. Set the DIP-SWITCH No. 10 to ON
7. Set all DIP-SWITCHS to ON for the functions to be activated
8. Remove the Jumper from J2 and replace it on BUZZ (J3)
9. Restore the DIP-SWITCH as noted down before (point 2)
if you want to use the special functions of the Menus 1 and 2 you will have to program them simultaneously starting
from those of the "menu 1", activate the DIP10 and then the DIP corresponding to the desired functions of the
"Menu2".
DIP-SWITCH
MENU 2 PROGRAMMING (J2 DIP. 10 on)
FUNCTIONING
DIP1
DIP2
DIP3
DIP4
DIP5
DIP6
DIP7
DIP8
DIP9
DIP10
SETTING
AND FOG2
OFF
OFF
X
X
X
X
X
X
X
X
X
FOG2 INPUT SETTING
IN OR MODE
ON
ON
X
X
X
X
X
X
X
X
X
FOG2 INPUT SETTING
IN AND MODE
SHOT
BLOCK
OFF
X
OFF
X
X
X
X
X
X
X
X
FUNCTION DISABLE
(OFF DEFAULT)
ON
X
ON
X
X
X
X
X
X
X
X
FOG2 INPUT SETTING
IN SAFE SHOT MODE
STATE
RELAY H24
N.C.
X
X
X
X
OFF
X
X
X
X
X
X
THE CONTACT OPENS
IN THE PRESENSE OF
A FAULT
X
X
X
X
ON
X
X
X
X
X
X
CAUTION!!!
EVERY TIME YOU ENTER IN THIS MENU, THE SPECIAL FUNCTIONS ARE RESTORED TO THE FACTORY
VALUES
, so if for example we have used 2 special functions and we have changed our mind on one of
these, entering in the menu again we will only need to reactivate the function that we intend keep (the
other one will be deactivated automatically)
