background image

Warranty and Liability Conditions 

1)

 

With this warranty, TEK GROUP S.r.l., based in 61025 Montelabbate (PU), Via Leonardo Da Vinci n. 
8, guarantees the product from any defects in materials and manpowers, provided that the use 
complies with the conditions indicated in the manual, for the duration of 24 months from the date 
of purchase of the product resulting from a fiscally valid document. 

2)

 

This warranty does not apply to: (a) consumable parts - such as fluids and batteries - and 
components subject to wear; (b) damage resulting from an installation not carried out according to 
the instructions contained in the manual supplied with the product; (c) failures resulting from the 
use of non-original components and / or fluid; (d) damage due to repairs made by unauthorized 
personnel or by the Customer; (e) faults caused by incorrect power supply or connection; (f) 
defects resulting from normal wear or otherwise due to aging of the product; (g) damage caused by 
fortuitous events, lightnings, flooding, fire, incorrect ventilation or other causes not attributable to 
TEK GROUP S.r.l. 

3)

 

If during the warranty period the Customer finds defects of conformity of the product, then this will 
have to report their presence to the Producer on penalty of forfeiture within one week of 
discovery. 

4)

 

The Customer, provided that he has provided a timely description of the data contained in the 
documentation referred to in point (5), may be authorized by TEK GROUP S.r.l. to send the faulty or 
defective device for its repair. The Producer reserves the unconditional right to replace the 
defective parts with new or regenerated parts and equivalent to new ones in terms of functions, 
performances and reliability. 

5)

 

In order for the warranty to be operational, it must be kept together with a fiscally valid purchase 
document - such as an delivery note, invoice, receipt, showing the name of the seller, the date of 
purchase, the identification details of the product and the sale price. 

6)

 

This warranty will expire if the product is shipped unaccompanied by the aforesaid documentation, 
without a suitable packaging to protect it from shocks and vibrations and in case it is not shipped in 
its entirety (including cover and fluid tank). The wall fixing bracket is not included among the 
components that must be sent to the manufacturer for repair purposes. 

7)

 

The costs of uninstalling the defective device and reinstalling the repaired product or returned 
product, as well as the return shipping costs, are not included in this warranty. 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for DT-400Lan

























Reviews: