DEFENDERTECH DT-400Lan Manual Download Page 21

Page: 21 / 24

DECLARATION OF CONFORMITY

TEK GROUP SRL

Via Leonardo da Vinci n. 8

61025 MONTELABBATE (PU)

F.C./VAT NUMBER – Registered in the Commercial Register of PU 02503990414

N. R.E.A. PU 186978

The manufacturer following tests carried out by the "EMCTEST-TECNOLOGIES" laboratory,

declares under his responsibility that the devices:

Items

Denomination

DT400plus/Lan/401
DT800plus/Lan/801

DT 1600plus/Lan/1601

“

DefenderTech

Fog Generator” Device

Fog Genrator for safety applications

They comply with the European Community Directives (Low Voltage), 2004/108/CE
(Electromagnetic Compatibily), 2002/95/CE (RoHS) e 2002/96/CE (RAEE).

It also declares that the euipement has been designed and constructed in compliance with

the following techincal standards:

CEI EN 60335-1:2008 + A13:2009
CEI EN 55014-1:2008+ A1:2010
CEI EN 55014-2:1998+A1:2002+A2:2009
CEI EN 61000-3-2:2007
CEI EN 61000-3-3:2009
CEI EN 50131-8

Montelabbate, March 12th 2014

TEK GROUP SRL

Summary of Contents for DT-400Lan

























Search results

Summary of Contents for DT-400Lan

Reviews:

Related manuals for DT-400Lan

Brands by name

Popular brands

DEFENDERTECH DT-400Lan, Manual

Search results

Summary of Contents for DT-400Lan

Reviews:

Related manuals for DT-400Lan

Brands by name

Popular brands