Wall or ceiling fixing
Make sure that the wall or ceiling chosen for the placement of the machine is
suitable to support the weight indicated in the technical data sheet.
Position the bracket as shown in the photo at a minimum distance of 15 cm from
the ceiling.
For wall installation
DO NOT TURN THE APPLIANCE
correct position as shown in the photo
Use 4 dowels (Fischer) of 10 mm of the type suitable for the wall where the machine
will be installed.
In the case of ceiling installation or directly to the wall, the procedure does not
change.
In the case of "Floating" installation (spaced from the ceiling), use 10 mm galvanized
steel threaded rods instead of the dowel screws and lock the bracket between nut
and locknut.
