5 Installation
Dedrone
10
IM-Inst-DT2536en
5.1.4
Power Supply, Cable Requirements and Required Tools
Power Supply
The Multi Sensor does not need any additional power supply connection. The power supply is
provided by the patch cable over active PoE+ (802.3at).
•
Make sure, that your network has activated
active PoE+ (802.3at)
.
•
We recommend installing additional overvoltage protection between the sensor and the
switch.
Cable Requirements
Type
Cat-6 Patch Cable
Recommendation:
Cat-7 Patch Cable
Maximum Length
100 m (328 ft)
For longer distances a PoE extender is required
External Diameter
3.5 mm – 7.5 mm
For a weather resistant connection to the Multi Sensor, it is necessary to crimp the supplied
environmentally sealed Ethernet crimp connector to the patch cable (see 5.2 Cable Preparation
(Crimp), page 12).
Required Tools
•
drilling machine
•
screwdriver
•
suitable screws for the underground
•
depending on the mounting location a ladder or lift truck
•
crimping tool. For an environmentally sealed connection to the Multi Sensor, it's necessary
to crimp the supplied connector to the patch cable.
•
hex key: size 4 mm
•
wrench: size 13 mm
