Dedrone
6 Configuration
IM-Inst-DT2536en
17
6.3
Integrate Multi Sensor in Your Network and Login to DT Control Center
To connect to the Multi Sensor, it is necessary to know the IP address of the Multi Sensor.
When the Multi Sensor is connected to your network, the router or DHCP-Server automatically
assigns an IP address to the Multi Sensor.
To find out the IP address, you have two important information:
•
MAC Address of the Multi Sensor (should be noted in chapter 12 "Overview Multi Sensor
Installations", page 25 and on the type label)
•
The network name of the Multi Sensor always starts with
DT…
In case of difficulties please consult your network administrator. To run the Multi Sensor with a
DroneTracker Server, note the planning manual "Set up a DroneTracker Server".
Requirements:
□
Multi Sensor is installed
□
Multi Sensor is connected to the network
□
the power supply is working and the button at the Multi Sensor illuminates blue
□
the IP address of the Multi Sensor is known
Procedure:
1
Start your web-browser.
For an optimal use, Dedrone recommends Chrome or Firefox.
2
Enter the IP address of the DroneTracker Server in the address field of your browser.
3
Log in the DT Control Center. The default login credentials are:
User:
admin
Password:
dedrone
The web interface DT Control Center appears.
4
Choose
OPTIONS > Site Configuration
.
5
Choose
in the Site Explorer and choose [
Add
] >
Discovered Sensors
.
The window
Discovered Sensors
appears.
6
Select the desired Multi Sensor and choose [
OK
].
The Multi Sensor appears in the Site Explorer.
7
To sort the RF-100 in the Site Explorer, drag and drop the element to the desired
position.
8
Choose [
Save Changes
].
The window
Site Configuration
disappears.
