Deditec ETH-TTL-64 Hardware Description Download Page 20

Page: 20 / 81

Software |

Seite

3. Software

3.1. Using our products

3.1.1. Access via graphical applications

3.1.2. Access via the DELIB driver library

The DELIB driver library contains the DELIB API and various programs for the
configuration test of our products.

The API gives you access to all the functions you need to communicate with our
products.

In the chapter

DELIB API Reference

you will find all the functions of our driver

library explained and provided with application examples.

3.1.3. Access via protocol

For products with Ethernet, CAN or serial interface, we offer you our open
protocols.

These protocols can be used without our DELIB driver library on devices with
the appropriate interface. The way through our protocols are operating system
independent.

You can find our manuals Protocols & Tabs here:

Download PDF:

http://www.deditec.de/pdf/manual_d_deditec_communication_protocols.pdf

Online HTML-Manual:

http://manuals.deditec.de/de/manual_deditec_communication_protocols/index.
html

Summary of Contents for ETH-TTL-64


















































































Search results

Summary of Contents for ETH-TTL-64

Reviews:

Related manuals for ETH-TTL-64

Brands by name

Popular brands

Deditec ETH-TTL-64, Hardware Description

Search results

Summary of Contents for ETH-TTL-64

Reviews:

Related manuals for ETH-TTL-64

Brands by name

Popular brands