Deditec ETH-TTL-64 Hardware Description Download Page 63

Page: 63 / 81

DELIB API reference |

Seite

5.3.8. DapiSpecialCounterLatchAll

Description

This command saves the counters of all digital inputs simultaneously into a
temporary storage (latch).

So, after that, the counter of the latch can be read successively.

Here, the speciality is, that it is possible to "freeze" simultaneously the counter
and the frozen counter (latch) can be read one by one.

Definition

void DapiSpecialCommand(ULONG handle, DAPI_SPECIAL_CMD_COUNTER,
DAPI_SPECIAL_COUNTER_LATCH_ALL, 0, 0);

Parameters

None

Return-value

None

Remarks

This command is only supported by our O8-R8 time modules!

Example program

DapiSpecialCommand(ULONG handle, DAPI_SPECIAL_CMD_COUNTER,

DAPI_SPECIAL_COUNTER_LATCH_ALL, 0, 0);

Summary of Contents for ETH-TTL-64


















































































Search results

Summary of Contents for ETH-TTL-64

Reviews:

Related manuals for ETH-TTL-64

Brands by name

Popular brands

Deditec ETH-TTL-64, Hardware Description

Search results

Summary of Contents for ETH-TTL-64

Reviews:

Related manuals for ETH-TTL-64

Brands by name

Popular brands