Deditec ETH-TTL-64 Hardware Description Download Page 11

Page: 11 / 81

Hardware description |

Seite

DIP Switch 2 Mode / Description

EEPROM write protection is active

If the write protection is active you can not configure the
network settings using the DELIB Configuration Utility.

OFF

EEPROM write protection is not active

DIP Switch 3 Mode / Description

The module starts with the parameters stored in the EEPROM.

OFF

The data stored in EEPROM values (IP address, gateway,
subnet mask, DHCP) are ignored during module startup.

The module starts with the default settings.

Default settings:

IP: 192.168.1.1

Subnet mask: 255.255.255.0

Gateway: 192.168.1.254

DHCP: Off

The values stored in the EEPROM will not be changed.

DIP Switch 4 Mode / Description

Module starts normally

OFF

Only for SERVICE purposes.

Module will stay in bootloader.

The values stored in the EEPROM will not be changed.

Summary of Contents for ETH-TTL-64


















































































Search results

Summary of Contents for ETH-TTL-64

Reviews:

Related manuals for ETH-TTL-64

Brands by name

Popular brands

Deditec ETH-TTL-64, Hardware Description

Search results

Summary of Contents for ETH-TTL-64

Reviews:

Related manuals for ETH-TTL-64

Brands by name

Popular brands