DeDietrich Innovens MCA 25/28 BIC, Installation And Service Manual

Page: 111 / 124

After Sales level - Menu #TEST INPUTS
Parameter Status Description
SEQUENCE
Control system sequence.
¼ See chapter: "Control system sequence", page
110
BOILER
Index of the generator in the system
TYPE
Generator type
R.CTRL A
(1)
ON
Presence of a remote control A
OFF
No remote control A
R.CTRL B
(1)
ON
Presence of a remote control B
OFF
No remote control B
R.CTRL C
(1)
ON
Presence of a remote control C
OFF
No remote control C
CALIBRA.CLOCK
(2)
Clock calibration
(1) The parameter is only displayed for the options, circuits or sensors actually connected
(2) The parameter is only displayed if
INSTALLATION
is set to
EXTENDED
After Sales level - #INFORMATION menu
Parameter Description
S/N SCU
Serial number of the SCU board
CTRL
Software version of the SCU board
S/N PCU
Serial number of the PCU board
VER.ROM
Version of the PCU PCB programme
VERS.PARAM PCU
Version of the PCU PCB parameters
S/N SU
Serial number of the SU board
VERS.PARAM SU
Version of the SU PCB programme
VERS.PARAM PCU
Version of the SU PCB parameters
MC.VERSION
(1)
Version of the boiler radio module programme
SOLAR VERS.
(1) Solar control system software version
CALIBRA.CLOCK
(2) Clock calibration
(1) The parameter is only displayed for the options, circuits or sensors actually connected
(2) The parameter is only displayed if
INSTALLATION
is set to
EXTENDED
After Sales level - Menu #CONFIGURATION
Parameter Adjustment range Description
MODE:
MONO
/
ALL.CIRC.
To chose if the exemption made for one remote control applies to a single circuit
(
MONO
) or if it must be transmitted to a group of circuits (
ALL.CIRC.
)
TYPE
Generator type (Refer to the original rating plate)
AUTODETECTION OFF/ON
System reset if error
L38
is displayed
TAS OFF/ON
Activation of the Titan Active System® function
MCA 25/28 BIC 8. Troubleshooting
15/06/12 - 300022159-001-01 109