
Setting
(read only)
Description
Value
GM013
Boiler shutdown signal input (0: Open, 1: Closed)
0/1
GM044
Reason for shutdown checked (0: None)
1. Heating Stoppage
2. DHW Stoppage
3. Awaiting burner ignition
4. Heating flow temperature above maximum value
5. Heating flow temperature above the starting value
6. Heat exchanger temperature above the starting value
7. Average heating flow temperature value above the starting value
8. Heating flow temperature above the setpoint value
9. Temperature difference between flow and return too great
10. Heating flow temperature above the shutdown value
11. Heat request before the minimum wait time between two consecutive requests
12. Shutdown caused by flame value being too low
13. Solar temperature above the shutdown value
0/13
9.4.1
Statuses and sub-statuses
The STATUS is the operating phase of the boiler at the moment of display. To view the status, select the parameter AM012.
The SUB-STATUS is the instantaneous operation the boiler is performing at the moment of display. To view the sub-status,
select the parameter AM014.
Tab.118 List of statuses
STATUS
Standby
0
Heat request
1
Burner ignition
2
Operation in heating mode
3
Operation in domestic water mode
4
Burner off
5
Pump post circulation
6
Burner shutdown to reach the temperature setpoint
8
Temporary fault
9
Permanent fault (fault to be reset manually)
10
Chimney sweep function at minimum output
11
Chimney sweep function at maximum output in heating mode
12
Chimney sweep function at maximum output in domestic water mode
13
Manual heat request
15
Frost protection function active
16
Venting function active
17
Boiler reset in progress
19
Tab.119 List of sub-statuses
SUB-STATUS
Standby
0
Wait time until next ignition in heating mode
1
Pre-ventilation
13
Burner ignition signal sent to safety core
15
Burner pre-ignition
17
Burner ignition
18
Flame check
19
Fan operation during ignition attempts
20
Operation at set temperature setpoint
30
en
9 Settings
194
INIDENS
7804841 - 02 - 20012022
Summary of Contents for INIDENS 20/24 MI
