DeDietrich INIDENS 20/24 MI, Installation And Service Manual, Page: 163 / 352

5.4 Choice of the location
5.4.1 Choice of the location
Fig.101 Dimensions
min.
250
2,5
6
1000
291
700
BO-0000227
2,5
min
200
min
240
A
B
395
Important
In order to make it easier to install and remove the boiler's flue gas adapter, it is recommended to respect the
dimensions indicated in the figure (expressed in mm) based on the type of adapter used (A, B).
Before installing the boiler, identify the ideal position for its assembly, taking into account:
Standards in force;
the overall dimensions of the appliance;
the position of the combustion gas exhaust outlets and/or the air intake fitting;
the boiler must be installed on a solid wall capable of bearing the weight of the appliance when full of water and fully equipped
with any accessories;
the boiler must be installed on a flat wall (maximum slope permitted 1.5°).
5.4.2 Data plate and boiler service label
Tab.102 Description of the data plate
"BRAND" Commercial brand
"Code" Product technical code
"Comm. Code" Product commercial code
"Product name" Model name
Qn Hi Nominal input (lower heating value).
Pn Effective rated output (flow 80°C return 60°C).
PMS Maximum heating circuit pressure (bar).
PMW Maximum domestic water circuit pressure (bar).
D Specific flow rate (l/min).
NOx NOx class.
IP Protection rating.
V-Hz-W Power supply and output.
Bxx/Cxx Flue gas exhaust type.
Fig.102 Data plate
BO-0000010
Qn Hi
Pn 80/60°C
Pn 50/30°C
PMS
PMW
D
NOx
xx - xx
xx - xx
kW
kW
kW
kW
kW
kW
xx - xx
xx - xx
xx - xx
3 bar <95 °C
8 bar
xx l/min
x
3P - G31 - 37 mbar
2H - G20 - 20 mbar
XX
II
xxxxx
X
0085
xxx V ~ xx Hz - xx W - IP xxx
7xxxxxx.xx
s/n: xxxxxxxxx
CN1=x CN2=x
“Product name”
“BRAND”
Cxx..Cxx..Bxx..Bxx
“Code” “Comm.Code”
5 Before installation
en
7804841 - 02 - 20012022 INIDENS 163