DeDietrich INIDENS 20/24 MI, Installation And Service Manual, Page: 193 / 352

9.4 Reading out measured values
To access the menu, press the two keys F3 - F4 together;
The symbol flashes on the display;
Press the F4 key to access the INFO menu;
Press the keys F2 - F3 to view the parameters;
Press the F1 key to exit
Tab.117 Read-only parameter list (not editable)
Setting
(read only)
Description Value
AM001 DHW (Domestic Hot Water) mode enabled (0: Disabled, 1: Enabled) 0/1
AM010 Pump speed (0 ÷ 100%) %
AM011 Service required (0: Disabled, 1: Enabled) 0/1
AM012 Status of appliance List of statuses
AM014 Sub Status of appliance List of sub-sta­
tuses
AM015 Pump operation (0: Disabled, 1: Enabled) 0/1
AM016 Flow temperature °C
AM018 Return temperature °C
AM019 Actual water pressure in central heating system bar
AM024 Current output of the boiler 0/100%
AM027 Outside temperature °C
AM036 Flue gas temperature °C
AM037 Status of the 3-way valve (0: Heating, 1: DHW) 0/1
AM040 Outgoing DHW temperature check °C
AM091 Season mode (0: winter, 3: summer) 0/3
AM101 Internal set point °C
BM000 DHW temperature °C
CM030 Current room temperature for zone °C
CM120 Current operating mode in the zone (0: Disabled, 1: Enabled) 0/1
CM190 Zone ambient set point °C
CM210 Outside temperature in the zone °C
CM280 Zone calculated set point °C
DM001 Temperature of the DHW tank °C
DM002 Outgoing DHW flow speed l/min
DM005 Solar system DHW temperature °C
DM009 Primary operating mode (0: Programming, 1: Manual, 2: Antifreeze/Holiday) 0/1/2
DM019 DHW mode active (1: Comfort, 2: Low, 3: Holiday, 4: Antifreeze 1/2/3/4
DM029 DHW temperature set point °C
GM001 Actual fan RPM rpm
GM002 Actual fan RPM setpoint rpm
GM003 Flame detected (0: Not detected, 1: Detected) 0/1
GM004 Gas valve (0: Open, 1: Closed, 2: Off) 0/1/2
GM007 Start-up (0: Off, 1: On) 0/1
GM008 Actual flame current measured μA
GM012 Contact release signal X16 (0: No; 1: Yes) 0/1
BO-0000272-3
F1 F2
F3 F4
F4 F3
9 Settings
en
7804841 - 02 - 20012022 INIDENS 193