Page 94 of
102.
Title NetVu Uniplex Appliance NVR Advanced Installation Manual
UK and EMEA: NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
If the command is successfully executed you will get either a command prompt or the outcome of
the command.
If the command is unsuccessful then you will get an error message.
Useful CLI Commands
The following Telnet commands are particularly useful in common situations.
ipcfg Shows the Ethernet IP information of the device
version Reports the software version number
engmode Resets the system and reboots into engineering (not recording) mode
reset Restarts the system - useful after loading software upgrade files.
arp Displays system ARP cache - to see other devices detected on the same
network as the device
svars List all the current system variables, allowing the diagnosis of faults
fdisk formats a hard disk
timezone Shows timezone data
tlmcmd Send Telemetry commands to local controller
tlmmode Send all keys to telemetry, Ctrl-D to quit
tlmdebug Telemetry debug messages on (1), off (0)
tlm_cam_status Show a camera's current telemetry context
There are many other useful commands and these can be discovered using the
HELP
command, as
previously described.
Using Disk Commands
A number of commands concerning the hard disks of the Device are also available. A list of
available disk commands can be viewed by typing
?
and then pressing
ENTER
The list of the available disk commands will scroll up the shell window, together with a brief
explanation of each command. You can scroll up and down this list after it has stopped to view the
available disk commands.
