Page 75 of
102.
Title NetVu Uniplex Appliance NVR Advanced Installation Manual
UK and EMEA: NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
Max Transmission Rate (kbits/s): Allows you to set the maximum transmission speed for the
network type, consult the network administrator if necessary.
Tx Image Buffers: This is used in order to improve the picture delivery over Ethernet, use 1 for a low
bandwidth connection, and 3 for a higher bandwidth. This limits the amount of frame buffering in
transmission between NVR and client. This is used in order to improve the picture delivery over
Ethernet when using a slow connection, i.e. 256Kbps. Options available are 1, 2 or 3 buffers.
Ethernet MTU Bytes: The MTU is the largest physical packet size measured in bytes that the
network can transmit, default is set at 1500bytes. This is the maximum transmission unit (MTU) in
bytes of the largest packet that can be passed through the network interface. Typically, 1500 is a
good default for most networks, speak to your network administrator if this needs to be matched
to suit your network topology.
Set DHCP: Click on this button to clear static IP address and subnet settings and restore DHCP IP
address setting in the unit.
Click the Save button when you have finished, in order to save the changes that you have made.
Network
– Multicast page
The multicast page is for the use of NetVu Ltd engineers only and no changes should be made to
this page before contacting NetVu Technical Support.
Network
– Firewall page
This page prevents un-authenticated remote access to the NVR.
