Page 32 of
102.
Title NetVu Uniplex Appliance NVR Advanced Installation Manual
UK and EMEA: NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
Click on Default (Green) to return the NVR to factory default settings. Network Settings such as IP
address will not be affected.
Click on Reset (Red) to re-start the NVR.
Features
The page is used to enable additional network ports on the NVR
Secondary Web Port : If the primary web port is blocked by the firewall, it is possible to configure a
second port number here. The unit is then accessed using the IP address of the unit, followed by a
colon (:) and this port number.
Enable Internal Alarm Receiver: When selected, the internal alarm receiver will be selected instead
of handling the alarms via powerscript. Changes to this value will need a reset.
