Page 49 of
102.
Title NetVu Uniplex Appliance NVR Advanced Installation Manual
UK and EMEA: NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
all be manually added at the same time, using a JSON file i.e. a file with a .JSON extension.
This format of file can be easily produced on a Windows PC using the + App and text
editor apps like TextWrangler on MAC.
The contents of the JSON file should be as follows:
Using the format shown above, for each camera there should be:
●
one line which gives the IP address of the camera
●
one line which gives the MAC address of the camera
●
one line which sets which channel of the NVR (1-64) that the camera is to be mapped to
In the above the example the cameras will be mapped to channels 55 and 56 of the NVR
The JSON file can have any name, but it is probably a good idea to give it a name which is
appropriate to the installation, for example, the name of the site.
Once you have created the JSON file click on the
Browse
button.
Select the file from your computer and then click on OK.
The name of the file will appear to the right-hand side of the
Browse…
button
When you are happy that everything is correct, click on
Save.
The cameras will now be added to
the NVR, and will be recorded and displayed. You can check this by going to the
Camera Overview
page of the Uniplex, where the new cameras should now be listed.
