16
1. Press Menu to display the main menu on the monitor. Select the Alarm option by pushing
the
Joystick
up or down and push to right to enter the detail menu.
2. Select the alarm input number by pushing the
Joystick
up or down and select the column
you wish to setup. Selected position will be highlighted.
3. Select the Preset, Status of Input (NC/NO/OFF), and Output (OUT1~4/OFF) by pushing the
Joystick to the right or to the left.
4. To increase or decrease the preset number or to change the status or output number, twist
the
Joystick
clockwise or counterclockwise. In case of preset, programmed preset number
will be scrolled.
5. Select the Save and Exit option by pushing the
Joystick
up or down. Save and exit the
program by pushing the
Joystick
to the right. Press
PRESET
+
96
to exit the program
without saving.
3.9 Area Title
Enter a specific name on programmed angle between START and END. For the screen below,
when the camera points at an angle between 124.3
°
to 359.5
°
, ABC will be displayed on the
screen.
There are 16 programmable numbers. Pages can be scrolled through by pushing the
Joystick
to the Left or Right on the first or last column of the menu. Pushing the
Joystick
to left on the
“NO” column of the menu to scroll to the previous page. Push the
Joystick
to right on the “END”
column to go to the next page.
1. Press
PRESET
+
95
to display the main menu on the monitor. Select the Area Title option
by pushing the
Joystick
up or down and push to right to enter the detail menu.
2. Select the area number by pushing the
Joystick
up or down. Select Start, End or number
column to be set by pushing the handle to the right or left. The selected column will be
highlighted.
3. To enter area title, select the number column and rotate the handle clockwise or
counterclockwise. You can select alphanumeric characters by rotating the handle. Move to
the next character by pushing the
Joystick
to the right. To finish entering the title, push the
Joystick
down.
AREA TITLE SETUP
NO TITLE START END
01 ABC 124.3 359.5
02 xxxxxxxxxxxxxxxx ===== =====
03 xxxxxxxxxxxxxxxx ===== =====
04 xxxxxxxxxxxxxxxx ===== =====
05 xxxxxxxxxxxxxxxx ===== =====
06 xxxxxxxxxxxxxxxx ===== =====
07 xxxxxxxxxxxxxxxx ===== =====
08 xxxxxxxxxxxxxxxx ===== =====
SAVE AND EXIT(ESC TO CANCEL)
HOLD DOWN CTRL KEY TO MOVE
PAINNING AND SET AREA ANGLE.
